Cutting technology

About us

Choose the company "Bear Log Homes" if you plan to build a log house or a bath house of cedar logs

Because we have a large choice of logs Work Yard in Siberia

Large selection of logs for logging

We live and work in Siberia, there - where the cedar grows. Therefore, we have the opportunity to choose the best logs for building your log cabin from Siberian cedar. This is especially noticeable when buildings log houses in a wild style, with different lengths of releases and when constructing houses using Post & Beam technology (beam and column construction), where a lot of beams and pillars are required with "specific", pronounced feathery releases.

Also, we can procure for your cedar house or logs a non-standard length log up to 12 meters.

We can build homes and cabins from logs of large diameter from fifty cm and more.

Because we have a build your log house by a team of professionals

For ten years of fruitful work, we have formed professional team of specialists in wooden housing construction. Architects and designers, scrapers and baits - every employee in the company Bear Log is a responsible and experienced worker, as well as a highly qualified specialist for which chopped cedar houses work everyday.

We got a lot of experience and got our hands on building more then one hundred log baths and houses in different styles for different technologies.

We have all types (technologies) building of log houses.

Because we build log homes according to the standards of the International Log Building Association.

With 2013, we actively apply the techniques andCanadian Standards standards recommended by the International Association of Wooden Housing (ILBA) for the construction of wooden log houses.

From this time on 2015, we were subcontracted by Canadian company Pioneer Log Homes of BC, the world leader in wooden housing construction, which built a log house of Canadian cedar in Moscow with an area of ​​more than 5000 м2. For 3 years of joint work with the company Pioneer log home, we thoroughly studied the technology of construction of large houses with chopped houses.

Because we have the most well-equipped work yard for build log cabins in Russia

The working platform of the company Bear logThe area of ​​our Work yard for Bear Log Homes is more than five thousand square meters.


  • Two tower cranes with a firing radius of forty meters long.
  • Two crane beams eighteen meters wide and a length of thirty meters
  • Indoor workshop more than one thousand five hundred square meters

The working areas are allowed to build up to ten log houses at once time

The team of the company "Bear Log Homes- Good houses from Cedar".

Bearloghomes - the established team of 20-25 people, consisting of several teams of experienced carpenters who have a rich experience of buiding (not one dozen) of wooden houses log cabins notch types - Russian notch, Canadian notch, Canadian diamond notch, Norwegian gun carriage and Post and Beam


Murugov Sergey

The founder of the company Bearloghomes

Ladyyshev Vasily

Master craftsmen


Bazarev Alexander

Master craftsmen

Andiyanov Edward

Master craftsmen


Mazhaev Roman

Wood carving master

IMG 20150831 125727 001

Ustinovich Marina



Murugova Maria

Representative of the company in St. Petersburg

Bearloghomes is not only highly skilled carpenters, but also people whose work is not visible, but without which it is impossible to build a house for you - berms, planers, tractor operators, crane operators, watchmen and administrators.

Handcrafting notch technology.

In the wooden house building there are two main technologies for felling the felling - this is felling in a bowl, it is subdivided into Canadian and Russian felling, as well as frame-timber technology - the so-called Post and Bim, from the English words Post and Beam (pole and beam). Thanks to the manual cutting, the highest quality is achieved, which cannot be obtained by processing the log in other ways. It was during manual processing that the log ideally retains its qualities - warmth, durability, natural beauty and resistance to environmental influences. Hand-cutting technology affects not only the style and appearance, but also the thermal conductivity and manufacturability of chopped log. The ability to use various materials for finishing and building a house. We will try to explain to you what the differences are.

Building Log cabin in notch

Building log cabins into the notch is the most popular technology. The walls in this case consist of logs arranged horizontally. In the places of connection or crossing of walls (cuts) during cutting, a l is cut in a log. Craft technology can be used according to Russian technology with a round notch or Canadian log cabin can be used, which is also divided into two types - the traditional Canadian or diamond notch.


Building log cabin in a Russian notchBuilding log cabin in a Russian notch

Building a log cabin in the Russian round notch - long, the most common type of crafting in Russia. In a cross, all the logs and notches have a round shape.

Disadvantages of building log cabins in the Russian notch.

In the process of shrinked logs decrease in size and in the corner joints of logs, crevices are formed, which in size the larger the thicker the diameter of the log. For example, if you use logs with a diameter of 30 cm in the logs, then gaps around 7-x mm can be formed, and if the log is at 40 cm, the slots can be up to 10-x mm.

Advantages of building log cabins in the Russian notch.

This type of felling is not in vain caught on in cold Russia. Usually the width of the groove in the log (thermal lock) is about half the diameter of the log.


Building log cabin in Canadian saddle notch

Felling log in the Canadian bowlCanadian saddle notch technology building log cabin is the most logical technology in wooden housing construction using logs with a diameter of forty cm or more.

The main advantage in the Canadian bowl during the cutting of the corner joint on top of the log is made by the cracks, which give the log in the place of cutting not a round but a saddle shape. Due to this, the upper log in the process of shrinkage does not form a gap in the cross-over, but slips along the made cracks downwards and prevents the appearance of cracks between the logs.

Log cabin in a traditional Canadian notch

In the felling in the log, the upper cracks are made to improve the shrinkage processes.

Advantages of the log building technology in the Canadian saddlenotch

Log house shrinkage processes for log home are more inconspicuous.

Disadvantages in the Canadian notch

In the formation of cracks, due to which in the Canadian notch the drying process more favorably passes, the width of the thermal groove between the logs decreases. When crafting logs in a Canadian notch of logs forty cm, the width of the tip will be about fifteen cm.


Building log cabins into a Canadian diamond notch

Cabin felling in the diamond bowlA wooden house or a sauna builded into a diamond canadian notch is considered aerobatics. Elegant appearance is achieved not only by the upper cracks in the overpass, but also by the lower ones. Thanks to the multiple intersection of facets (cracks) in the curb, this type of felling got its name - diamond.

Advantages of technology of building log houses in a diamond Canadian notch.

The same as the traditional Canadian notch - favorable processes for logging in the period of shrinkage of logs.

Disadvantages of building log cabin in a Canadian diamond notch

Slight width of the heat groove. It can be even narrower than the house cut builded in a traditional Canadian notch because the log has cracks from above and below the log. We recommend building houses in a Canadian diamond notch made of logs with a diameter of at least forty cm.


Log cabin in a hybrid style.

Felling log hybrid styleEverything is very simple and understandable! First floor handcrafted in notch, second floor Post and Beam/ - Characteristic Canadian style!

Advantages of building a frame in a hybrid style

If you have a complex (not a two-slopes roof), then it is not possible to use handcrafted pediments. The rafters system rigidly fastened by the crate, counter crate, roofing cover will not allow the gables located perpendicular to each other during the shrinkage to change the angle of the roof slope by using a traditional razor using traditional sliding supports for rafters. On the pediments between the logs, slots equal to the value of the log's service are necessarily formed.

Disadvantages of building a log house in a hybrid style


Building log homes in technology Post and Beam

Post and Beam felling logging, when the frame - the foundation of the house consists from beams and posts made of logs - allows you to use a variety of materials to fill the walls - horizontal logs without overburden, stone, glass. As a rule, framed walls are made with cladding with various types of cladding boards - log siding, shingles, imitation of timber or unedged board. Also on the frame wall, you can easily lay tile or stick wallpaper. Post and beam houses allow using completely different finishing and building materials in the design.

Type of notch Felling house Post and Beam.

Advantages of building Post and Beam

The frame-and-log structure is very stable and practically does not shrink.

Disadvantages of building by Post & Beam technology

The disadvantage of a frame-and-frame construction can be filling the walls with a chopped log. The height of the walls and beams in Post & Beam houses remains unchanged over time, while the chopped walls are subject to shrinkage.

More information on the page Building log homes Post and Beam technology

The rich experience and knowledge of carpenters of the company Bear Log Homes allow you to build a wooden log house by any known of handcrafted method

Find out why people choose the company Bearloghomes for the building log homes ?

Partnership with architects and builders

The company "Bear Log Homes" builds wooden houses and baths from the Siberian wood species - cedar, larch or Angara pine. We are build of log houses since XNUMX, and we have practical construction experience aimed at an impressive result and in fact the high quality of the work performed.

Ready to build for your customers logs cabin:

  • Country houses;
  • Baths;
  • Pergolas, parking and awnings, entrance groups;
  • Commercial objects: shops, stables, restaurants, health complexes.

We do our work with excellent quality!

Our experience and possibilities of the construction site allow us to chop houses of any complexity in any cutting technique - into a bowl, a post and a beam, a timber frame.

We are interested in рimplementations INTERESTING AND NON-STANDARD PROJECTS.

In case of appeal to you Customer in terms of requirements and quality of life above average - feel free to offer chopped logs of cedar or larch!

Architects and Architectural Bureau

Construction companies

With your project, and we undertake the construction of the house!

We can carry out construction of the "turnkey". Starting from the foundation, the supply of wall kit from Siberia, installation of roofing and finishing the house or bath.

You can expand the list of your services and enter the "premium" segment of the market if you offer your Customers to build objects from cedar logs!

We will design and manufacture for you only a wall (log) set of a house or a bath.

Cooperating with us - you can discover new opportunities for promoting your business, both by motivating current and attracting new customers!

We build all over Russia and for export.

Log homes and cabins from Russia

We are lucky to live and work in one of the most remarkable places in Siberia - the Republic of Khakassia.

There are few places where still big and clear skies are today. Also, there is a great number of mountain rivers and streams from which we drink water without fear. Besides, there are a lot of different species of fish in our rivers, such as grayling and trout; valuable Siberian larch and cedar in virgin taiga; wild bears and hermits conservatives, who lives in this taiga. Minutes of Siberians Travel to the unique salt lakes Shira and Bele to relax and improve their health!

Such habitat creates a special attitude to work. When you hack or rasp cedar and larch - you get closer to nature and certainly pure spirit with every touch by hands to nature, with every breath aroma of resin.

Here in this atmosphere we are ready to build you Siberian log cabin from a logs of siberian cedar and larch species growing in taiga - lungs of our planets!

Russian wooden houses

Now we have own 55 000 m2 work yard, two cranes and build in one time 10-15 log homes or cabin from Siberian pine (Russian cedar) and Siberian larch. Bear Log Homes's high skilled craftsman can build for your wooden log homes in any type of notch - Russian or Norvegian notch, canadian diamand notch, Post and beam or Timber frame homes.

You can see same of Russian wooden houses which Bear log homes built.

Russian cabin

Wooden Russian cabin from the Siberian company and the manufacturer are inexpensive, strong and reliable. The cabin'll serve you and your children for hundred years! You can make sure of this by visiting Sayanogorsk.

Timber kings Russia house

timber king Russian house

In 2013-2015 years BearLogHomes companу had a unique opportunity to participate in the construction of 6 000 m2 log house in Moscow (show HGTV Timber kings Russia house) in a subcontract with the leader of the building log homes Pioneer Log Homes of BC. The experience gained in working together with the International Log Builder Association (ILBA),

If you want to buy russian log cabin, please fill request

Please publish modules in offcanvas position.